|
Post by Fletch on Jun 6, 2009 0:50:56 GMT -8
Well it's been one of those weeks where if it could possibly go wrong it did in spades. Managed to get 1 of the 3 '32 Sedans completed for the Inner Club Challenge between SABA, the club I belong to , and Lane Auto Modelers from Eugene. So here is the first completed build of the Sedans: Hosted on FotkiBody and chassis are straight from the box with changes to the axles to drop the ride height. The kit supplied flat head gave way to the flat head from the '50 Ford Pickup. The Ardun hears were used along with a S.C.o.T.s Blower from RMoM, this has to be the best cast resin part on the market today. The S.C.o.T.s is topped by 2 0f the Stromberg 97s from the '50 Ford pickup and a Thicksun Air Cleaner also from RMoM. A Parts by Parks pre-wired distributor was used. The exhaust headers are from AMTs Phantom Vicky with sculpting wire bent to shape to connect to the kit supplied exhaust pipes. The wide white wall tires are from the Revell '29 Pickup. The Radir wheels are out of the '64 Thunderbolt. The front and rear frame spreader bars were replaced with aluminum tubing.
|
|
|
Post by bigkydd on Sept 30, 2009 18:18:55 GMT -8
Hey dave, I like it!!
|
|